Customization
Not only does the MVP-50P come standard with a large assortment
of monitored functions, you can add to the impressive selection when you purchase one or more of the kits below. Check
out the Downloads Section to view wiring diagrams for many of the accessory kits.
Temperature Probes
All probe kits include 1 ea. temperature probe and 1 ea. XDS-6' extension cable.
Price per Probe Kit
$98
P-100-MVP
CHT Probe, Screw-In, 3/8"-24.
P-101-MVP
CHT Probe, Military Bayonet (Quick Disconnect, requires A-101).
A-101-MVP
Adaptor for P-101-MVP.
P-102-3/8-MVP
CHT Probe, 3/8" Gasket, "Piggybacks" on a Primary
CHT Probe.
P-102-18-MVP
CHT Probe, 18mm Gasket, generally used under a sparkplug.
P-102-14-MVP
CHT Probe, 14mm Gasket, generally used under a sparkplug.
P-102-12-MVP
CHT Probe, 12mm Gasket, generally used
under a sparkplug.
P-110-MVP
Standard EGT/TIT Probe, Hose Clamp, .187" Diameter.
P-110-F-MVP
Fast Response EGT/TIT Probe, Hose Clamp,.125" Diameter.
P-111-MVP
Standard TIT Probe, 1/8" NPT, .187" Diameter.
P-111-MVP
Fast Response TIT Probe, 1/8" NPT,
.125" Diameter.
P-112-MVP
Standard TIT Probe, 7/16"-20, .187" Diameter.
P-114-MVP
Standard TIT Probe, 1/4" NPT, .187" Diameter.
P-114-F-MVP
Fast Response TIT Probe, 1/4" NPT, .125" Diameter.
P-120-MVP
Oil Temp Probe, 5/8"-18.
P-128-MVP
Outside Air Temp or Carb Temp Probe, 1/4"-28
P-104-MVP
Universal Temp Probe (Surface Temp), #6 Hole.
Pressure Transducers
All Pressure Transducer Kits include 1 ea. Pressure Transducer, and 1 ea. Cbl-4D-6'
extenstion harness.
PT-30GA-MVP
Pressure Transducer, 0 to 40 psi. Price: $165.
PT-100GA-MVP
Pressure Transducer, 0 to 120 psi. Price: $165.
PT-300GA-MVP
Pressure Transducer, 0 to 300 psi. Price: $165.
PT-3000S-MVP
Pressure Transducer, 0 to 3000 psi.
Price: $250.
PT-30-ABS-MVP
Absolute Pressure Transducer, 0 to 36 In Hg (Manifold or Cabin Pressure). Price: $150.
PT-60-ABS-MVP
Absolute Pressure Transducer, 0 to 70
In Hg (Manifold Pressure). Price: $150.
PT-05-Diff-MVP
Differential Pressure Transducer, 0
to 6 In Hg (Vacuum Pressure, Airspeed, Cabin Differential Pressure). Price: $150.
PT-04H2O-MVP
Differential Pressure Transducer, 0 to 5 in H2O. Price: $250
Fuel Flow
Electronics International hand crafts each precision Fuel Flow Transducer by hand, in their
factory in Bend, Oregon. This is why all similar tranducers have exactly the same K Factor. For instance, all FT-60's
have a K-Factor of 68,000, FT-90's have a K-Factor of 33,000, and FT-180's have a K-Factor of 22,700. This kind of
precise consistency in manufacturing is not found in any other Flow Transducer.
FT-60
Fuel Flow Transducer (Red Cube). Range: .6 to 70+ GPH. Price: $295
FT-90
Fuel Flow Transducer (Gold Cube). Range: .3 to 125 GPH. Price: $295
FT-180
Fuel Flow Transducer (Black Cube). Range: 5 to 250 GPH. Price: $495
Fuel Level
RFLM-4-12
Resistive Level Fuel Module. Must be used with the EDC to measure up to 4 resistive fuel level sensors. Specify 12 or 24 volt system. Price: $59
P-300C
3/4" Diameter, Capacitive Fuel Level
Probe, 3/4" NPT fitting, and Accessories. MUST SPECIFY PROBE LENGTH WHEN ORDERING (any length from 6 inches to 20
feet long). Price: $198
P-300C-Mini-1/8"( or 1/4"):
3/16"
Diameter Capacitive Fuel Level, 1/4" or 1/8" NPT fitting, and Accessories. MUST SPECIFY PROBE LENGTH WHEN
ORDERING (any length from 2 inches to 6 feet long). Price: $148
Volts and Amps
FM-VA-50-MVP or FM-VA-300-MVP
Volts/Amps Module. Allows any temperature
or pressure channel on the EDC to measure Voltage AND Current on a seperate bus. Comes with an S-50 or S-300 Shunt.
Price: $195.
S-50 Shunt
50 Amp, 50 mV (100 Amp capacity) External Shunt. Price: $35
S-300 Shunt
300 Amp, 50 mV (300 Amp capacity) External Shunt. Price: $43
Miscellaneous
G Meter
G Meter, 0.1 g resolution, +/- 8 g's max, for recording g's during entire flight.
Price: $295
EGView
EGView Charting Software. Used for analyzing
and downloading data from the MVP-50P. Price (No Discounts): $125
USB-64
USB Memory Stick, 64 MB or larger. Used to
upload and download data to and from the MVP-50P. Price: $35
CP-1-MVP
LED Intesnity Control Pot. External Pot used to control the display
intensity of the MVP-50P screen. Price: $39
EDC-33P-4/6
Adding a second EDC to the MVP allows additional temperatures,
pressures, annunciators and other functions to be monitored on the MVP-50P (Requires use of Input Channel 3 on the
MVP-50P).
MVP-50P (Display Only)
May be used to display parameters in a second
location.
VI-221
Voltage Interface Unit. Allows any temperature
of fuel level channel on the EDC to measure output voltage of any device. This voltage measurement can then be used to
drive an annunciator (Canopy Latch, Gear Lights, Baggage Door, etc...) that will be displayed on the MVP-50P screen.
Price: $6
353-201
Remote Mount Carbon Monoxide Detector.
(Requires use of Input Channel 3 on the MVP-50P). Also provides Cabin Pressure (Altitude) and Cabin Temperature. Price
(No Discounts): $459
|
Electronics International Inc.
